Renault Can Clip Key Card Encoding for Laguna 2 ph2

I have programmed key card for Laguna 2 ph 2 with Renault Can Clip diagnostic interface. I share my operation procedure in this blog with you.

Vehicle model:

Laguna 2 ph2

Tools required:

Renault Can Clip

PC with window XP or Win7

New key

Keys needed to be operable.

Procedure in detail:

Turn on ignition with a working key card

Start up the Renault Can Clip

Go to the UCH section

Enter the configuration mode at the top

Choose encoding/reading

Select button SC003 Spare/reserve

Enter 5938 followed by the enter when prompted for a code.

Now you need to write down the ISK Code

Need the bytes from 18 up to 23. Some cars do require up to byte 24

In the lower bar you have the actual byte value (in this case the ISK code is 48FDA395AFC5)

Open Renault Pin Extractor

Go to the ISK tab

Select your car and enter the ISK code you just wrote down.

Click to button” ISK TO PIN” Copy the calculated PIN code.

The section of the Can Clip can be closed.

Go to secured encoding/reading, and choose encode cards.

Remove the card from the card slot and press continue.

Now we need to present all the cards wanted to be operate with one at a time

Just follow the commands on the screen.

The new card won’t be recognized by the car yet. Don’t worry.

Now we have to write the outcode, and use it to calculate another code with Renault Pin Extractor.

Go back to Renault Pin Extractor and go to the clip tab

Enter the outcode you just got and Enter the Vin (vin is at the bottom of your screen)

Paste the Pin Code we copied earlier and press Calculate

Copy the Calculated Incode, go back to Can Clip and paste the incode.

Present the cards again one by one and follow the on screen instructions

Now you can enjoy your new key card.

Remove the card and let the pc write all the data away.

RF sync should be OK

DONE!